Methodology
Our methodology for water well drilling in Irving begins with a thorough site assessment, including review of historical well logs and geological maps. We employ rotary drilling techniques suitable for the mixed sedimentary formations common to the area, such as sandstones and shales. Sampling intervals follow ASTM D1586 standards for Standard Penetration Test (SPT) at 1.5-meter intervals to characterize soil strength and stratigraphy. This data informs casing depth, screen placement, and yield estimates, ensuring long-term well performance. Our team integrates water well drilling best practices with local knowledge to optimize each project.
Reference Technical Parameters
| Parameter | Reference Value |
|---|---|
| Predominant soil type | Clay and sand with gravel horizons |
| Maximum seismic acceleration (PGA) | 0.15g (ASCE 7-16) |
| Typical groundwater level | 10–25 ft below ground surface |
| Bedrock depth | 50–200 ft (Eagle Ford Shale) |
| Typical N60 range | 5–30 blows/ft |
Local Considerations — Irving
Irving's geology is dominated by Quaternary alluvium over Cretaceous sedimentary rocks, including the Eagle Ford Shale and Austin Chalk. The Trinity Aquifer provides groundwater at depths of 100–300 ft, with yields varying by location. Seismic hazard is low to moderate, with peak ground acceleration of 0.15g per ASCE 7-16. Contrasting neighborhoods like Las Colinas (developed on former floodplain) versus older areas near downtown present different drilling conditions: alluvial sands versus clay-rich terraces. Typical projects include residential wells for lawn irrigation and municipal supply wells. For operations extending beyond Irving, our team also provides artesian wells in surrounding regions.
Request a Quote
Our team reviews your project and issues an initial report at no cost.
Or write us directly at contact@waterwelldrillingco.com
Services in Irving
Applicable Standards
- ASTM D1586 – Standard Penetration Test (SPT)
- ASCE 7-16 – Minimum Design Loads for Buildings
- Texas Water Development Board (TWDB) well construction standards
- City of Irving municipal well permitting requirements
Frequently Asked Questions
What soil types are commonly encountered when drilling water wells in Irving?
Irving's subsurface consists of clay, sand, and gravel layers from the Trinity River alluvium, underlain by Eagle Ford Shale and Austin Chalk at depth. These mixed conditions require careful drilling fluid management and casing design to prevent collapse and ensure well stability.
Does seismic design apply to water well drilling in Irving?
Yes, per ASCE 7-16, Irving is in Seismic Design Category B with a peak ground acceleration of 0.15g. While not critical for shallow wells, deeper municipal wells may require seismic considerations for casing and pump housing to withstand potential ground motion.
Are water well drilling permits required in Irving?
Yes, the City of Irving requires permits for new wells, modifications, and decommissioning. Applicants must submit drilling plans, site location, and intended use to the Development Services Department. Compliance with Texas Water Development Board standards is also mandatory.